STATE CHEMICAL MANUFACTURING CO -- HI-SOLIDS  -- 7930-00N010571
<pre>=====================  Product Identification  =====================

Product ID:HI-SOLIDS
MSDS Date:02/01/1986
FSC:7930
NIIN:00N010571
=== Responsible Party ===
Company Name:STATE CHEMICAL MANUFACTURING CO
Address:3100 HAMILTON AVENUE
City:CLEVELAND
State:OH
ZIP:44114
Info Phone Num:216-861-7114
Emergency Phone Num:216-861-7114
CAGE:53798
=== Contractor Identification ===
Company Name:STATE CHEMICAL MANUFACTURING CO.
Address:3100 HAMILTON AVENUE
Box:City:CLEVELAND
State:OH
ZIP:44114-3701
Country:US
Phone:216-861-7114
CAGE:53798

=============  Composition/Information on Ingredients  =============

Ingred Name:2-(2-ETHOXYETHOXY)ETHANOL (DIETHYLENE GLYCOL MONOETHYL
    ETHER)
CAS:111-90-0
RTECS #:KK8750000
Fraction by Wt: <5%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:TRIBUTOXYETHYLPHOSPHATE (2-BUTOXY-PHOSPHATE ETHANOL)
CAS:78-51-3
RTECS #:KJ9800000
Fraction by Wt: <2%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ETHYLENE GLYCOL  (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: <2%
Other REC Limits:N/K 
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NIOSH STUDIES INDICATE
    2-(2-ETHOXYETHOXY)ETHANOL HAS CAUSED REPRODUCTIVE DISORDERS IN
    LABORATORY ANIMALS (RATS/MICE) AND MAY HAVE THE POTENTIAL FOR
    CAUSING SIMILAR DISORDERS IN HUMANS .
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:DIRECT CONTACT MAY RESULT IN
    IRRITATION.SKIN:N/K .INGESTION:DO NOT TAKE
    INTERNALLY.INHALATION:N/K .
Medical Cond Aggravated by Exposure:N/K 

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH IMMEDIATELY WITH PLENTY OF COOL WATER FOR AT LEAST
    15 MIN.IF IRRITATION PERSISTS,CONTACT MD.SKIN:WASH THOROUGHLY WITH
    PLENTY OF SOAP & WATER.IF IRRITATION DEVELOPS,CONTACT
    MD.INGESTION:DO N OT TAKE INTERNALLY.IF
    SWALLOWED,CONTACTMD.INHALATION:REMOVE TO FRESH AIR.SUPPORT
    BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION) .

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Lower Limits:N/K 
Upper Limits:N/K 
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION MAY RESULT IN
    FORMATION OF CARBON MONOXIDE AND/OR CARBON DIOXIDE GASES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP SPILL ON SAND,VERMICULITE,ETC.FLUSH
    RESIDUES TO THE DRAIN WITH A GOOD DETERGENT AND WATER.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY PLACE.AVOID
    FREEZING.WHEN NOT IN USE,KEEP CONTAINER TIGHTLY CLOSED.DO NOT
    RETURN UNUSED MATERIAL TO PRODUCT CONTAINER.
Other Precautions:READ & FOLLOW ALL LABEL DIRECTIONS & PRECAUTIONS
    BEFORE USING.INTENDED FOR INDUSTRIAL USE ONLY.KEEP OUT OF REACH OF
    CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .DO NOT DELIBERATELY INHALE THE VAPORS OF ANY
    PRODUCT NOT SPECIFICALLY DESIGNED TO BE INHALED.
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
    CONCENTRATION BELOW TLV .NORMAL VENTILATION IS ADEQUATE.
Protective Gloves:RECOMMENDED
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:N/K 
Supplemental Safety and Health
% VOLATILES BY WEIGHT:76-78.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F,100C
Melt/Freeze Pt:M.P/F.P Text:N/K 
Decomp Temp:Decomp Text:N/K 
Vapor Pres:N/K 
Vapor Density:N/K 
Spec Gravity:1.018 (WATER=1)
pH:8.75
Evaporation Rate &amp; Reference:N/K 
Solubility in Water:COMPLETE
Appearance and Odor:A WHITE EMULSION WITH A MILD ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
N/K 
Stability Condition to Avoid:EXPOSURE TO HEAT OR TO FREEZING
    TEMPERATURES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY RESULT IN
    FORMATION OF CARBON MONOXIDE AND/OR CARBON DIOXIDE GASES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
    FEDERAL,STATE AND LOCAL REGULATIONS .DO NOT REUSE EMPTY CONTAINERS
    FOR ANY PURPOSE.FLUSH THOROUGHLY WITH WATER,CRUSH AND DISCARD OR
    GIVE RINSED DRUMS TO A DRU M RECONDITIONER FOR RECYCLING.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.